Home > Product > Centrifugal Blower

Centrifugal Blower Series A

Flow:50~2500m^3/min Boost:20~50kpa

This series centrifugal blower is single suction, low speed, single stage, double support structure. Centrifugal blower is mainly consists of blower unit, bearing housing, motor, lubrication system, local monitoring instruments, necessary valves of inlet and outlet pipes and etc.
This series centrifugal blower applies to petrochemical, metallurgy, sewage treatment and other industries. It is used to convey air, nitrogen and various gases. It can also convey other non-corrosive mixed gas, for example, SO2. Usually discharge pressure is less than 60kpa. Dust content conveyed is no more than 10mg/m3.

Centrifugal Blower DPCB

Flow:2200~12800m^3/min Pressure:1.5~3

This series centrifugal blower is single suction, high speed, single stage, overhung support structure. Centrifugal blower is mainly consists of blower unit, high speed gear box, motor, lubrication system, local monitoring instruments and etc.
The kind of centrifugal compressors are widely engaged in the transmission of air, coke oven gas and other non-toxic and non-corrosive gas mixture. They are usually used in dealing the waste gas and water of urban industries,catalytic cracking,Gas desulfurization of petrification industries.

Centrifugal Blower Series C

Flow:50~1000m^3/min Boost:30~200kpa

This series centrifugal blower is single suction, low speed, multi stage, double support structure. Centrifugal blower unit is mainly consists of stator, rotor, bearing, bearing housing, sole plate and etc.. It is driven by motor directly through coupling.
This series centrifugal blower applies to petrochemical, metallurgy, sewage treatment and other industries. It is used to convey air, nitrogen and various gases. It can also convey other non-corrosive mixed gas, for example, SO2. Usually discharge pressure is less than 0.3MPa. Dust content conveyed is no more than 10mg/Nm3.

Centrifugal Blower Series D

Flow:300~1500m^3/min Boost:200~400kpa

This series centrifugal blower is single inlet, high speed, multistage, double support structure. Bearing has two types, one is pad bearing ,another is elliptical journal bearing, of high reliability. Pneumatic design: high efficient model stage is used for modelling design. It is of reliable performance and high efficiency. its impeller will use 2D and 3D type, which has remarkable energy saving effect. Centrifugal blower unit is mainly consists of stator, rotor, bearing, bearing housing, sole plate and etc.. The auxiliary system includes lubrication system, high position oil tank, gearbox and other equipments.
The kind of centrifugal compressors are widely engaged in the transmission of air, coke oven gas and other non-toxic and non-corrosive gas mixture. They are usually used in the metallurgical and chemical industry, for instance, the application of vacuum machine in the integrated soda plants.